The Excavator-Mounted Stump Mill 275

Grind Up To 6 acres Per Day!

You can utilize the excavator you already have. The excavator mounted stump mill mounts on the end of the boom as easily as changing a bucket or mount to the Sneller Multi~Task 190.

The Sneller Stump Mill 275 is one of the most dependable, well built machines available. Unmatched reliability, designed tough and maintenance friendly too. Cab mounted electric controls let the operator start, stop and idle up and down the engine from the cab. A fuel pump that feeds the Sneller Stump Mill can also be turned on and off in the same manner. Triple sealed lower bearing system increases the cutter wheel bearing life up to 7000 hours....Belt and gear combination for the drive system features durability  and strength. Air filters change from outside yet protected inside. Grease fittings in convenient locations, as well as the oil plug for oil changing.

Exclusive cutter wheel design allows sections of the wheel to be removed and changed when worn without removing or changing the wheel. There is no welding! Exclusive teeth fit directly into the wheel and are easily removed with a punch and hammer. When the wheel does need replacing it detaches in two parts and replaces in the same manner.

The Multi~Task 190 does just that ......Multiple tasks with the change of attachments; Stump Mill, 360° Grapple, shear or hot saw options. Heavy undercarriage with sealed and lubricated track chain elements and lifetime-lubricated oversized heavy-duty rollers. Oversized travel motors with two-speed travel. Curved double bar grouser track shoes 23.6" (600mm).

Sneller has teamed up the Stump Mill 275 and the 190 carrier as a special unit designed just for stumping. Trailer as one piece. Federal highway legal width and height.

The Sneller Stump Mill 275 is the stump grinder attachment for you, if you own a 20 metric ton or larger excavator. There is no hydraulic dedication since it has its own Cummins 275 h.p. QSB5.9-C engine. Change attachments easily.

Maintenance Convenience of course. There is convenient access to the diesel engine and also to the service areas. A well-planned out design for the air cleaner and pre-cleaner is another advantage Sneller Machine offers. With our combination of belt and gear drive, we have eliminated the problems and costs of a chain drive or hydraulics.

Power . . . The Sneller Stump Mill has its own 200 or 275 horsepower diesel engine. This eliminates changing the application on your excavator.

275 hp of pure cutting power is faster and more efficient for milling any size stump.

Better Visibility and overall viewing from the excavator's cab height enables the operator to locate each stump faster, and have a clear view of the whole job.

This photo shows the view taken from the operator's seat. You can see how the 42-inch cutting wheel and stump are both visible to the operator during the cutting process. Going from the top of the stump to the roots at any depth. Visibility and power are there.

While using the full swing, reach, and depth of your excavator's boom and dipper, you'll have no restrictions and spend less time maneuvering. . .

That's another reason why uneven terrain is not a problem for the Sneller Excavator Mounted Stump Mill, whether it's the other side of a ditch or on a slope.

Stump Mill Package

• A Mounting Link is made specifically to fit your model excavator, for easy mounting and disconnect.

• An Electric Panel Control to start and stop the engine, with engine data placed inside the cab. An Electric Fuel Pump to supply diesel fuel to the stump mill from the excavator.

• A Stand to hold the stump mill when not attached to the excavator.